# PACKARDBELL for 1997 Packard Bell Multimedia L97 200 MHz Pentium

include 	"arch/i386/conf/std.i386"
options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary

maxusers	16		# estimated number of users

# CPU-related options.
#options 	USER_LDT	# user-settable LDT; used by WINE
#makeoptions	SPECTRE_V2_GCC_MITIGATION=1	# GCC Spectre variant 2
						# migitation
#options 	SPECTRE_V2_GCC_MITIGATION

# CPU features

#options 	MTRR		# memory-type range register syscall support
options 	MULTIBOOT	# Multiboot support (see multiboot(8))

# delay between "rebooting ..." message and hardware reset, in milliseconds
#options 	CPURESET_DELAY=2000

# This option allows you to force a serial console at the specified
# I/O address.   see console(4) for details.
#options 	CONSDEVNAME="\"com\"",CONADDR=0x2f8,CONSPEED=57600
#	you don't want the option below ON iff you are using the
#	serial console option of the new boot strap code.
#options 	CONS_OVERRIDE	# Always use above! independent of boot info

# Standard system options

options 	INSECURE	# disable kernel security levels - X needs this

options 	RTC_OFFSET=0	# hardware clock is this many mins. west of GMT
options 	NTP		# NTP phase/frequency locked loop

options 	KTRACE		# system call tracing via ktrace(1)

#options 	CPU_UCODE	# cpu ucode loading support

# Note: SysV IPC parameters can be changed dynamically; see sysctl(8).
options 	SYSVMSG		# System V-like message queues
options 	SYSVSEM		# System V-like semaphores
options 	SYSVSHM		# System V-like memory sharing

options 	MODULAR		# new style module(7) framework
options 	MODULAR_DEFAULT_AUTOLOAD

options 	USERCONF	# userconf(4) support
#options 	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)
#options 	SYSCTL_INCLUDE_DESCR	# Include sysctl descriptions in kernel

# Beep when it is safe to power down the system (requires sysbeep)
options 	BEEP_ONHALT
# Some tunable details of the above feature (default values used below)
#options 	BEEP_ONHALT_COUNT=3	# Times to beep
#options 	BEEP_ONHALT_PITCH=1500	# Default frequency (in Hz)
#options 	BEEP_ONHALT_PERIOD=250	# Default duration (in msecs)

# Alternate buffer queue strategies for better responsiveness under high
# disk I/O load.
#options 	BUFQ_READPRIO
#options 	BUFQ_PRIOCSCAN

# Diagnostic/debugging support options
#options 	DIAGNOSTIC	# inexpensive kernel consistency checks
				# XXX to be commented out on release branch
#options 	DEBUG		# expensive debugging checks/support
#options 	LOCKDEBUG	# expensive locking checks/support
#options 	DDB		# in-kernel debugger
#options 	DDB_ONPANIC=1	# see also sysctl(7): `ddb.onpanic'
#options 	DDB_HISTORY_SIZE=512	# enable history editing in DDB
#options 	DDB_VERBOSE_HELP
#options 	KGDB		# remote debugger
#options 	KGDB_DEVNAME="\"com\"",KGDB_DEVADDR=0x3f8,KGDB_DEVRATE=9600
#makeoptions	DEBUG="-g"	# compile full symbol table
#options 	KUBSAN		# Kernel Undefined Behavior Sanitizer (kUBSan)
#options 	UBSAN_ALWAYS_FATAL	# (optional) Panic on all kUBSan reports
#options 	SYSCALL_STATS	# per syscall counts
#options 	SYSCALL_TIMES	# per syscall times
#options 	SYSCALL_TIMES_HASCOUNTER	# use 'broken' rdtsc (soekris)
#options 	KDTRACE_HOOKS	# kernel DTrace hooks

# Kernel Code Coverage Driver.
#makeoptions	KCOV=1
#options 	KCOV

# Compatibility options
include 	"conf/compat_netbsd09.config"
#options 	COMPAT_386BSD_MBRPART # recognize old partition ID

# Wedge support
#options 	DKWEDGE_AUTODISCOVER	# Automatically add dk(4) instances
#options 	DKWEDGE_METHOD_GPT	# Supports GPT partitions as wedges
#options 	DKWEDGE_METHOD_BSDLABEL	# Support disklabel entries as wedges
#options 	DKWEDGE_METHOD_MBR	# Support MBR partitions as wedges
#options 	DKWEDGE_METHOD_APPLE	# Support Apple partitions as wedges
#options 	DKWEDGE_METHOD_RDB	# Support RDB partitions as wedges

# File systems
include "conf/filesystems.config"

# File system options
#options 	FFS_EI		# FFS Endian Independent support
#options 	FFS_NO_SNAPSHOT	# No FFS snapshot support
#options 	QUOTA		# legacy UFS quotas
#options 	QUOTA2		# new, in-filesystem UFS quotas
#options 	UFS_DIRHASH	# UFS Large Directory Hashing
#options 	UFS_EXTATTR	# Extended attribute support for UFS1
options 	WAPBL		# File system journaling support
#options 	LFS_DIRHASH	# LFS version of UFS_DIRHASH - experimental
#options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
				# immutable) behave as system flags.
#options 	DISKLABEL_EI	# disklabel Endian Independent support
#options 	NFSSERVER	# Network File System server
#options 	V7FS_EI		# V7FS Endian Independent support

# Networking options
#options 	GATEWAY		# packet forwarding
options 	INET		# IP + ICMP + TCP + UDP
options 	INET6		# IPv6
#options 	IPSEC		# IP security
#options 	IPSEC_DEBUG	# debug for IP security
#options 	MPLS		# MultiProtocol Label Switching (needs mpls)
#options 	MROUTING	# IP multicast routing
#options 	PIM		# Protocol Independent Multicast
#options 	NETATALK	# AppleTalk networking protocols
#options 	CAN		# Controller Area Network protocol
#options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
#options 	PPP_DEFLATE	# Deflate compression support for PPP
options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
#options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG

#options 	ALTQ		# Manipulate network interfaces' output queues
#options 	ALTQ_BLUE	# Stochastic Fair Blue
#options 	ALTQ_CBQ	# Class-Based Queueing
#options 	ALTQ_CDNR	# Diffserv Traffic Conditioner
#options 	ALTQ_FIFOQ	# First-In First-Out Queue
#options 	ALTQ_FLOWVALVE	# RED/flow-valve (red-penalty-box)
#options 	ALTQ_HFSC	# Hierarchical Fair Service Curve
#options 	ALTQ_LOCALQ	# Local queueing discipline
#options 	ALTQ_PRIQ	# Priority Queueing
#options 	ALTQ_RED	# Random Early Detection
#options 	ALTQ_RIO	# RED with IN/OUT
#options 	ALTQ_WFQ	# Weighted Fair Queueing

# These options enable verbose messages for several subsystems.
# Warning, these may compile large string tables into the kernel!
#options 	ACPIVERBOSE	# verbose ACPI device autoconfig messages
#options 	EISAVERBOSE	# verbose EISA device autoconfig messages
#options 	MIIVERBOSE	# verbose PHY autoconfig messages
#options 	PCIVERBOSE	# verbose PCI device autoconfig messages
#options 	PCI_CONFIG_DUMP	# verbosely dump PCI config space
#options 	PCMCIAVERBOSE	# verbose PCMCIA configuration messages
#options 	SCSIVERBOSE	# human readable SCSI error messages
#options 	USBVERBOSE	# verbose USB device autoconfig messages
#options 	PNPBIOSVERBOSE	# verbose PnP BIOS messages
#options 	PNPBIOSDEBUG	# more fulsome PnP BIOS debugging messages
#options 	MCAVERBOSE	# verbose MCA device autoconfig messages
#options 	HDAUDIOVERBOSE	# human readable HDAUDIO device names

#options 	NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM

#
# wscons options
#
# builtin terminal emulations
#options 	WSEMUL_SUN		# sun terminal emulation
options 	WSEMUL_VT100		# VT100 / VT220 emulation
# customization of console and kernel output - see dev/wscons/wsdisplayvar.h
options 	WSDISPLAY_CUSTOM_OUTPUT	# color customization from wsconsctl(8)
#options 	WS_DEFAULT_FG=WSCOL_WHITE
#options 	WS_DEFAULT_BG=WSCOL_BLACK
#options 	WS_DEFAULT_COLATTR="(0)"
#options 	WS_DEFAULT_MONOATTR="(0)"
options 	WS_KERNEL_FG=WSCOL_GREEN
#options 	WS_KERNEL_BG=WSCOL_BLACK
#options 	WS_KERNEL_COLATTR=""
#options 	WS_KERNEL_MONOATTR=""
# customization of console border color
options 	WSDISPLAY_CUSTOM_BORDER	# custom border colors via wsconsctl(8)
#options 	WSDISPLAY_BORDER_COLOR=WSCOL_BLUE	# default color
# compatibility to other console drivers
options 	WSDISPLAY_COMPAT_PCVT		# emulate some ioctls
options 	WSDISPLAY_COMPAT_SYSCONS	# emulate some ioctls
options 	WSDISPLAY_COMPAT_USL		# wsconscfg VT handling
options 	WSDISPLAY_COMPAT_RAWKBD		# can get raw scancodes
#options 	WSKBD_EVENT_AUTOREPEAT		# auto repeat in event mode
#options 	WSKBD_USONLY			# strip off non-US keymaps
# don't attach pckbd as the console if no PS/2 keyboard is found
options 	PCKBD_CNATTACH_MAY_FAIL
# see dev/pckbport/wskbdmap_mfii.c for implemented layouts
#options 	PCKBD_LAYOUT="(KB_DE | KB_NODEAD)" # for pckbd driver
#options 	UKBD_LAYOUT="(KB_DE | KB_NODEAD)"  # for ukbd driver
# allocate a number of virtual screens at autoconfiguration time
#
options 	WSDISPLAY_DEFAULTSCREENS=4
# use a large software cursor that doesn't blink
options 	PCDISPLAY_SOFTCURSOR
# modify the screen type of the console; defaults to "80x25"
#options 	VGA_CONSOLE_SCREENTYPE="\"80x24\""
# work around a hardware bug that loaded fonts don't work; found on ATI cards
#options 	VGA_CONSOLE_ATI_BROKEN_FONTSEL
# console scrolling support.
options 	WSDISPLAY_SCROLLSUPPORT
# enable VGA raster mode capable of displaying multilingual text on console
#options 	VGA_RASTERCONSOLE
# enable splash screen support; requires genfb or radeonfb
#options 	SPLASHSCREEN

# Keylock support
#options 	KEYLOCK
#options 	secmodel_keylock	# Requires options KEYLOCK

# Kernel root file system and dump configuration.
config		netbsd	root on ? type ?
#config		netbsd	root on sd0a type ffs
#config		netbsd	root on ? type nfs

#
# Device configuration
#

# Advanced Configuration and Power Interface

# This option can be used to retrieve CPU and APIC information.
# that I/O APICs can be used if ACPI is enabled below.
#options 	MPBIOS_SCANPCI	# find PCI roots using MPBIOS
#options 	ACPI_SCANPCI	# find PCI roots using ACPI

options 	VGA_POST		# in-kernel support for VGA POST

# PCI bus support
pci*	at mainbus? bus ?
pci*	at pchb? bus ?
#pci*	at ppb? bus ?

# Configure PCI using BIOS information
pchb*	at pci? dev ? function ?	# PCI-Host bridges
pcib*	at pci? dev ? function ?	# PCI-ISA bridges
isa0	at pcib?

# ISA Plug-and-Play bus support
isapnp0 at isa?

# wscons
pckbc0		at isa?			# PC keyboard controller
pckbd*		at pckbc?		# PC keyboard
pms*		at pckbc?		# PS/2 mouse for wsmouse
#options 	PMS_DISABLE_POWERHOOK	# Disable PS/2 reset on resume
#options 	PMS_SYNAPTICS_TOUCHPAD	# Enable support for Synaptics Touchpads
#options 	PMS_ELANTECH_TOUCHPAD	# Enable support for Elantech Touchpads
#options 	PMS_ALPS_TOUCHPAD	# Enable support for Alps Touchpads
vga*		at pci? dev ? function ?
options 	VCONS_DRAW_INTR
wsdisplay*	at vga? console ?
wsdisplay*	at wsemuldisplaydev?
wskbd*		at pckbd? console ?
wsmouse*	at pms? mux 0
wsmouse*	at wsmousedev?

attimer0	at isa?
pcppi0		at isa?
sysbeep0	at pcppi?

# ISA serial interfaces
#options 	COM_HAYESP		# adds Hayes ESP serial board support
com0	at isa? port 0x3f8 irq 4	# Standard PC serial ports

# ISA parallel printer interfaces
lpt0	at isa? port 0x378 irq 7	# standard PC parallel ports

# Hardware monitors

scsibus* at scsi?

# SCSI devices
sd*	at scsibus? target ? lun ?	# SCSI disk drives
st*	at scsibus? target ? lun ?	# SCSI tape drives
cd*	at scsibus? target ? lun ?	# SCSI CD-ROM drives
ch*	at scsibus? target ? lun ?	# SCSI autochangers
ses*	at scsibus? target ? lun ?	# SCSI Enclosure Services devices
ss*	at scsibus? target ? lun ?	# SCSI scanners
uk*	at scsibus? target ? lun ?	# SCSI unknown

# IDE and related devices
# PCI IDE controllers - see pciide(4) for supported hardware.
# The 0x0001 flag force the driver to use DMA, even if the driver doesn't know
# how to set up DMA modes for this chip. This may work, or may cause
# a machine hang with some controllers.
piixide*	at pci? dev ? function ?	# Intel IDE controllers

# ATA (IDE) bus support
atabus* at ata?
options 	ATADEBUG

# IDE drives
# Flags are used only with controllers that support DMA operations
# and mode settings (e.g. some pciide controllers)
# The lowest order four bits (rightmost digit) of the flags define the PIO
# mode to use, the next set of four bits the DMA mode and the third set the
# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
# to use, and the last bit must be 1 for this setting to be used.
# For DMA and UDMA, 0xf (1111) means 'disable'.
# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
# (0xc=1100, 0xa=1010, 0xf=1111)
# 0x0000 means "use whatever the drive claims to support".
wd*	at atabus? drive ? flags 0x0ff0

# ATAPI bus support
atapibus* at atapi?

# ATAPI devices
# flags have the same meaning as for IDE drives.
cd*	at atapibus? drive ? flags 0x0ff0	# ATAPI CD-ROM drives
#sd*	at atapibus? drive ? flags 0x0ff0	# ATAPI disk drives
#st*	at atapibus? drive ? flags 0x0ff0	# ATAPI tape drives
#uk*	at atapibus? drive ? flags 0x0ff0	# ATAPI unknown


# Miscellaneous mass storage devices

# ISA floppy
fdc0	at isa? port 0x3f0 irq 6 drq 2	# standard PC floppy controllers
fd*	at fdc? drive ?			# the drives themselves

# PCI USB controllers
ohci*	at pci?	dev ? function ?	# Open Host Controller
uhci*	at pci?	dev ? function ?	# Universal Host Controller (Intel)
usb*	at uhci?

#include "dev/usb/usbdevices.config"

# USB Hubs
uhub*   at usb?
uhub*   at uhub? port ? configuration ? interface ?

# USB HID device
uhidev* at uhub? port ? configuration ? interface ?

# USB Mass Storage
umass*  at uhub? port ? configuration ? interface ?
scsibus* at umass?
atapibus* at umass?
# flags have the same meaning as for IDE drives.
cd*     at atapibus? drive ? flags 0x0000       # ATAPI CD-ROM drives
sd*     at atapibus? drive ? flags 0x0000       # ATAPI disk drives
#st*	at atapibus? drive ? flags 0x0000       # ATAPI tape drives
uk*     at atapibus? drive ? flags 0x0000       # ATAPI unknown

# USB Ethernet adapters
axe*    at uhub? port ?			# ASIX AX88172 based adapters
rum*    at uhub? port ?			# Ralink Technology RT2501/RT2601 802.11a/b/g
run*    at uhub? port ?			# Ralink Technology RT(2[78]|30)00 802.11a/b/g/n
urtwn*  at uhub? port ?			# Realtek RTL8188CU/RTL8192CU 802.11b/g/n
ukphy*	at mii? phy ?			# generic unknown PHYs

ym*	at isapnp?			# Yamaha OPL3-SA[23] audio
mpu*	at isapnp?
midi*	at pcppi?			# MIDI interface to the PC speaker
spkr*	at pcppi?			# PC speaker
joy*	at isapnp?			# Game ports (usually on audio cards)
audio*	at audiobus?
spkr*	at audio?			# PC speaker (synthesized)

# Pull in optional local configuration
cinclude "arch/i386/conf/GENERIC.local"


# Pseudo-Devices

pseudo-device	crypto			# /dev/crypto device
pseudo-device	swcrypto		# software crypto implementation

# disk/mass storage pseudo-devices
#pseudo-device	bio			# RAID control device driver
#pseudo-device	ccd			# concatenated/striped disk devices
#pseudo-device	cgd			# cryptographic disk devices
#pseudo-device	raid			# RAIDframe disk driver
#options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
# Options to enable various other RAIDframe RAID types.
#options 	RF_INCLUDE_EVENODD=1
#options 	RF_INCLUDE_RAID5_RS=1
#options 	RF_INCLUDE_PARITYLOGGING=1
#options 	RF_INCLUDE_CHAINDECLUSTER=1
#options 	RF_INCLUDE_INTERDECLUSTER=1
#options 	RF_INCLUDE_PARITY_DECLUSTERING=1
#options 	RF_INCLUDE_PARITY_DECLUSTERING_DS=1
#pseudo-device	fss			# file system snapshot device

pseudo-device	md			# memory disk device (ramdisk)
options 	MEMORY_DISK_HOOKS	# enable root ramdisk
options 	MEMORY_DISK_DYNAMIC	# loaded via kernel module(7)

pseudo-device	vnd			# disk-like interface to files
#options 	VND_COMPRESSION		# compressed vnd(4)

# network pseudo-devices
pseudo-device	bpfilter		# Berkeley packet filter
#pseudo-device	carp			# Common Address Redundancy Protocol
pseudo-device	loop			# network loopback
#pseudo-device	mpls			# MPLS pseudo-interface
pseudo-device	ppp			# Point-to-Point Protocol
#pseudo-device	pppoe			# PPP over Ethernet (RFC 2516)
#options 	PPPOE_SERVER		# Enable PPPoE server via link0
pseudo-device	sl			# Serial Line IP
#pseudo-device	irframetty		# IrDA frame line discipline
pseudo-device	tap			# virtual Ethernet
pseudo-device	tun			# network tunneling over tty
#pseudo-device	gre			# generic L3 over IP tunnel
pseudo-device	gif			# IPv[46] over IPv[46] tunnel (RFC 1933)
#pseudo-device	faith			# IPv[46] TCP relay translation i/f
#pseudo-device	stf			# 6to4 IPv6 over IPv4 encapsulation
pseudo-device	vlan			# IEEE 802.1q encapsulation
#pseudo-device	bridge			# simple inter-network bridging
#pseudo-device	vether			# Virtual Ethernet for bridge
#pseudo-device	agr			# IEEE 802.3ad link aggregation
#pseudo-device	l2tp			# L2TPv3 interface
#pseudo-device	lagg			# Link Aggregation interface
pseudo-device	npf			# NPF packet filter
# srt is EXPERIMENTAL
#pseudo-device	srt			# source-address-based routing

#pseudo-device	canloop			# CAN loopback interface

#
# accept filters
pseudo-device	accf_data		# "dataready" accept filter
pseudo-device	accf_http		# "httpready" accept filter

# miscellaneous pseudo-devices
pseudo-device	pty			# pseudo-terminals
pseudo-device	sequencer		# MIDI sequencer
# rnd works; RND_COM does not on port i386 yet.
#options 	RND_COM			# use "com" randomness as well (BROKEN)
pseudo-device	clockctl		# user control of clock subsystem
pseudo-device	ksyms			# /dev/ksyms
#pseudo-device	lockstat		# lock profiling
#pseudo-device	bcsp			# BlueCore Serial Protocol
#pseudo-device	btuart			# Bluetooth HCI UART (H4)
#pseudo-device	gpiosim		1	# GPIO simulator
pseudo-device 	swwdog			# software watchdog timer -- swwdog(4)

# wscons pseudo-devices
pseudo-device	wsmux			# mouse & keyboard multiplexor
pseudo-device	wsfont

# cmos(4) pseudo-device
pseudo-device	cmos

# userland interface to drivers, including autoconf and properties retrieval
pseudo-device	drvctl